how to fix the support code 1660 on Canon Pixma printer. You can fix it very easily through the given methods. I hope this solution will help for you.
 |
| how to fix the support code 1660 on Canon Pixma mx922 printer |
The Canon Pixma mx922 is an all in one, the wireless printer with
several features. It has a high paper capacity and excellent photo quality. It
can be used as both home and office printers. But its speed is slow when
compared to other printers.
Canon Pixma printer support code 1600 solutions
In this article, we are sharing the methods for fix the
support code 1660 in the Canon Pixma Mx922, Mx722, Ip7220, Ip8720, Ix6820, Mg5420, Mg5422, Mg5520, Mg5522m Mg5620m Mg6320, Mg6420, Mg6620, Mg7120, and Mg7520 Printers. You can fix it very easily through
the given methods. I hope this solution will help you to solve this support
code.
What does the support code 1660 mean?
The support code 1660 in the Canon mx922 printer is indicating that the ink tank is not inserted in your printer. You can't continue printing
when this error code pops up. There may be various causes behind this error
code. Some of them are listed below,
- Defective ink cartridges.
- If the Ink cartridges are not properly inserted.
- Use of compatible ink cartridges.
- Disarranged Ink cartridges.
How can we fix the support code 1660 in Canon Pixma mx922?
Method 1
- Check the ink cartridges: Take out the printer cover. If the Ink cartridges are not correctly installed, then the red light on the cartridges will turn off. So if the red light is off then you have to reinstall properly. Take out the cartridges and wait for 5 seconds and then install it. The orange protective cap on the bottom of the ink cartridges must be replaced. After this process Press the resume/ cancel button. Now you can continue your printing.
Method 2
- Clean the ink cartridges: First of all, unplug the printer and detach all the cables from the printer. After that open the cover and take out all the cartridges and clean it carefully. The Reinstall it. Plugin your printer, then press and hold the reset button. If the connection between printer and ink cartridges are started, there will be a red light blinking on the cartridges. Now press and hold the reset button. Release it if the green light starts to blink.
Method 3
- Clean the contacts.
- Always use original cartridges.
- Reinstall or replace the ink cartridges.
Now the resetting procedure is finished. First, take a test
print and check if the error is gone or not.
I hope this helps you.
If the error persists after doing the above solutions, you should
contact the Canon Customer Service Team for the assistance of an expert. They
will assist you to get rid of this issue.
Share your experience with us through the comment section.
I've been using generic cartridges for a couple of years now on my Canon TS5060, and up until the other day when I replaced the cyan, I had no problem. I took out the generic cyan cartridge and put a new one of the exact brand, but this time it came up with support code 1660, thus not being recognised. When I put the old cartridge back in, low and behold, it didn't recognise that either, even though it had been in there for 3 months. Can I override this so I don't have to throw out my new generic cartridges and pay exorbitant prices for genuine ones?
ReplyDelete