There is some information that may help you to solve this error code c6400 on your Kyocera FS 1016MFP, FS-1116MFP, FS 1128MFP, FS-1028MFP, FS-1030MFP, FS-1130MFP copier. You can fix it in a few simple steps: Follow the steps below.
Kyocera FS-1016MFP error code C6400 solutions
There is some information that may help you to solve this error code c6400 on your Kyocera FS 1016MFP, FS-1116MFP, FS 1128MFP, FS-1028MFP, FS-1030MFP, FS-1130MFP copier. You can fix it in a few simple steps: Follow the steps below.
Meaning of the C6400 Error Code:
Kyocera error code C6400 is the engine board (KP-5238) that does not detect the zero-crossing signal for the time specified at power-on-3 s Others-5 s. You can solve the error code C6400 by resetting it or when it is a false error, can’t be reset it and may also require new parts.
How to C6400 fix the error:
To reset this error, do the following.
- Turn the power switch off.
- Open the front cover.
- Turn the power switch on.
- Press the system menu/counter key button.
- Then press the "start, #" and "Enter" buttons same time
- Search for “Maintenance mode” and press the “Enter” key.
- A selection item appears, enter the “163” and press the “Enter” key.
- Select “Execute” then press the “Enter” key.
- After this is complete press the back key. Then switch off the machine and turn the power back ON at the power socket and the code should reset.
If the error code C6400 reappears checks all of these, you have to try to separate the power PCB from the engine PVB and reassemble them to see if the problem has been resolved. Or you need to replace the Power PCB. This is a common problem in this range (1016 / 1116MFP).
Some possible cause:
- Poor contact in the connector terminals.
- Check the engine board
- Check the power supply board.
I hope this was helpful, don’t forget to share it via any of the share buttons on this page are highly welcomed as well.
COMMENTS