Kyocera TaskAlfa 250ci C3100 error solution

Kyocera TaskAlfa 250ci C3100 error solution. In this article I explain how to fix my Kyocera TaskAlfa 250ci Error Code C3100. This article describes the following Kyocera TaskAlfa 250ci, 300ci, 400ci, 500ci, and 552ci copier models. We are sharing a few methods to solution the error, so check them one by one until it gets solved.

Error code c3100 Kyocera TaskAlfa 250ci

In this article, I explain how to fix my Kyocera TaskAlfa 250ci Error Code C3100. This article describes the following Kyocera TaskAlfa 250ci, 300ci, 400ci, 500ci, and 552ci copier models. We are sharing a few methods to solve the error, so check them one by one until it gets solved.

Meaning of c3100 Error code:

Kyocera 250ci error code C3100 Scanner carriage problem. Clean Optics for Dust. This is related to the scanner, which can cause dirty optics. The problem may be simple as the sensor is not in the home position. Solve accordingly. Unplug the device during troubleshooting. You need to fix it with any obstacles or traps to prevent the scanner from moving.

Some possible causes:

• The home position is not correct when the power is turned on or when you copy the document placed on the contact glass.
•  Poor contact of connector terminals.
•  Check the scanner home position sensor.
• Check the scanner motor.
• Check engine PCB.

I hope this was helpful, don’t forget to share it via any of the share buttons on this page are highly welcomed as well.