Sharp ar-6020 error code f2 solution

How to resolve error code F2-02 with sharp AR-6020

Here in this article I explain how to solve your Sharp AR-6020 error code F2. This should solve your problem. We are sharing a few methods to fix the related error F2-02 and F2-04 in Sharp AR-6020D, AR-6023, AR6026, and AR6031 so check them one by one until it gets solved.



Meaning of the F2 Error Code:

The F2 error code means toner cartridge chip destination error, Or toner not supply properlyWhen f2 flashes on display just press start key you will receive a sub code, If sub code is F2-02 this is toner supply problem, if F2-04 this is that you are using the wrong toner.

How to fix the F2 error code:

Toner supply abnormality caused by Installation of new toner cartridge. This code you may have to clean out the developing unit and start with fresh developer. Make sure the developer unit is not leaking from one of the bearings.
·        Replace the toner cartridge.
·        Clean the toner sensor
·        Change the developer.

If you find your parts, then replace the parts and error still remains, after automatically reset the error code. If the error is still showing even after above solutions, then you have no choice other than calling Sharp service technician.




I hope this was helpful, don’t forget to share it via any of the share buttons on this page are highly welcomed as well.

0 comments: