This error code E000-0001, E001-0000, E001-0001, E001-0002, E002-0000, and E003-0000 are an error code related to the fixing unit in canon iR3235
Canon iR3035, IR3045, IR3235, IR3245 error code e000001-0001
Fix error code e000001-0001 in Canon iR3245 |
This article contains the meaning and solutions for the error code e000001-0001 in canon iR3035, IR3045, IR3235, IR3245, IR3245i, IR3325i, ir3235i series copier. This error code E000-0001, E001-0000, E001-0001, E001-0002, E002-0000, and E003-0000 are an error code related to the fixing unit. This may due to many reasons. You can understand the reason behind it and also you can solve it by following methods.
Meaning of the error E001-0001
The error code e000001-0001 stands for problems in fixing unit. That is the temperature on the fixing unit is very high or low. The temperature of the main thermistor is 250 degree Celsius or above for continuous 200m seconds. It occurs due to various reasons. May be due to variations in the voltage or loose contact in the power cable. If these are the reasons you can solve it by resetting. Sometimes the problem may be in the thermistor or the filament of fixing unit. You can find these problems by using a multimeter. If these are the reasons, you have to replace it.
How to reset the error code e000001-0001
Follow the steps below:
- Press the “Additional Functions (*)” button once.
- Press the “2,8” buttons at the same time once.
- Press the “Additional Functions (*)” button.
- The System Management screen will open. Touch the “COPIER” button on the screen.
- Touch the “FUNCTION” button at the top of the screen.
- Touch the “CLEAR” button.
- Touch the “ERR” button.
- Touch the “OK” button.
- Then switch off the machine and turn ON the code should be reset. Machine will process for 2 minutes.
Even if the above fixes are shown in error code. Then check these all things.
solutions
- Replace the thermistor
- Replace the filament of fixing unit
- Check the DC controller PCB.
COMMENTS