How to fix HP printer error code 58.20?, You can fix the error code 58.20 very easily through the given methods follow the steps below to solve.
 |
| How to fix HP printer error code 58.20? |
The HP LaserJet 4250n is a simple, ideal, and quick printer
having a print speed of 45 ppm. It has one of the best remote management
software.
Solution for hp LaserJet 4250 error code 58.20
In this article, we are sharing the methods for fix the error
code 58.20 in hp LaserJet
4250, LaserJet 4200, LaserJet 4240, LaserJet 4300, and LaserJet 4350 printer.
There is a small confusion over this error code. Because in the service
manual the error code is given as 58.2 but the error is display as 58.20. but both
are the same. You can fix the error code 58.20 very easily through the given
methods. I hope this solution will help you to solve this error code.
What does the error code 58.20 in HP LaserJet printer means?
The error code 58.20 in HP LaserJet 4250 printer is indicating a memory error or defective air temperature sensor (TH3). The Air temperature the sensor is to measure the internal and external temperature of the printer to
put the machine in a proper environment for functioning. The Air temperature
sensor or the Thermistor (TH3) is attached over the main cooling fan located on
the left side of the printer.
How can we fix the error code 58.20 in HP LaserJet 4250 printer?
- Turn off and then turn on the printer.
- Restore the connection of the connector (J63) between the Air temperature sensor and the engine Power supply.
- Check the Air temperature sensor, replace it if necessary.
- Check the engine Power supply, replace it if necessary.
I hope this helps you.
If the error persists after doing the above solutions, you should
contact the HP LaserJet Customer Service Team for the assistance of an expert. They
will assist you to get rid of this issue.
Share your experience
with us through the comment section.
COMMENTS