Trouble Code C-6752 Reset on Konica Minolta C220/C280/C360

Solved Error Code C-6752 on Konica-Minolta C220/ Bizhub C280/ bizhub C360

Trouble Code C-6752 Reset on Konica Minolta C220/C280/C360
Trouble Code C-6752 Reset on Konica Minolta C220/C280/C360
Are you getting the trouble code C-6752 on your Konica-Minolta copier? These articles describe solution for how to fix trouble code c-6752 in Konica-Minolta bizhub C220, bizhub C280 and bizhub C360 series copier machine. This should solve your problems. We are sharing a few methods to fix the error, so check them one by one until it gets solved.




Maintenance sign means that the copier needs to be well serviced and checked if something is to be replaced. Consumables such as Toner, Drum, Blade, Fuser rollers, Pickup roller and Developer are changed at such times. And also check the changing consumables are original or not .Always use spares having good quality. If you are sure that you have replaced the correct part or nothing is to be replaced, after ensuring these things, you can proceed to clear the sign. Always call experienced technicians for servicing.

Meaning of the error code C-6752

This code means is related to CCD. When starting the scanner, verification on reading and writing the predetermined value for image processing ASIC on CCD board (CCDB) was conducted, and verification failure was detected. If that is the case consider the following.

·        Clean optics spotless.
·        Clean platen glass spotless.
·        Clean background white plate (on ADF) spotless.
·        CCD board (CCDB).
·        DC power supply (DCPS).

If the error is still showing even after above solutions, then you have no choice other than calling Konica Minolta technician.




After you replace the part, you have to reset the machine in service mode COPIER

0 comments:

Note: only a member of this blog may post a comment.