how to reset error code c6400 on kyocera km 2050. Kyocera KM 2050 KM-1620, km-1635 error code C6400 is meant Fuser Unit Error Code. The zero-cross signal is not inputted for 3 seconds. In some cases, you can solve the error code C6000, C6300, and C6400 by resetting it or when it is a false error, can’t be reset it and may also require new parts.
Error code C6400 on Kyocera KM-2050
Kyocera km 2050 error code c6400 |
The maintenance sign means that the copier needs to be well serviced and checked if something is to be replaced. Consumables such as Toner, Drum, Blade, Fuser rollers, Pickup roller, and the developer are changed at such times. And also check the changing consumables are original or not. Always use spares having good quality. If you are sure that you have replaced the correct part or nothing is to be replaced, after ensuring these things, you can proceed to clear the sign. Always call experienced technicians for service.
Meaning of C6400 error code:
Kyocera KM2050 error code C6400 is meant Fuser Unit Error Code. The zero-cross signal is not inputted for 3 seconds. In some cases, you can solve the error code C6400 by resetting it or when it is a false error, can’t be reset it and may also require new parts.
Fix the C6000 error:
To reset this error, do the following.
- Press the number key on “10871087” Until the machine U000 shows itself
- Press the “163” and press the “Start” key,
- Scroll to “EXECUTE”, and then press “Enter”
- Then Turn off the power switch wait 20 seconds and power on the machine and the code should reset.
If the error code C6400 reappears. So, you should pick up the fuser unit and check. Check your fuser unit thermistor or thermostat and heater lamp.
I hope this was helpful, don’t forget to share it via any of the share buttons on this page is highly welcomed as well
It was the first time such happened to my machine. I dialed the code and it fixed the error thank you very much.
ReplyDeleteThanks
ReplyDeleteThanks alot.. brother you just saved me
ReplyDeleteSab try kiya lekin solved nehi hua
ReplyDeletePLS HOW DO I CLEAR ERROR CODE 6400 FROM MY UTAX CD 5025
ReplyDeletePlease how do l clear error C6400 on my KM-1650 KYOCERA
ReplyDeleteO que devo fazer na impressora m 2040 com o código C 6400
ReplyDeleteThanks alot
ReplyDeleteThank you, thank you, as this was a donated copier our finance department wasn't prepared to have it fixed but this worked!!!!!!!! Happy days!
ReplyDelete