Are you getting the status as Machine failure C2840 on your Kyocera TASKalfa 2551ci, 3051ci, 3551ci, 3550ci, 4551ci, 5551ci Copier?.we are sharing....
How to fix Kyocera 2551ci Error Code C2840?
How do I fix Kyocera 2551ci Error Code C2840? |
Are you getting the status as Machine failure C2840 on your Kyocera TASKalfa 2551ci, 3051ci, 3551ci, 3550ci, 4551ci, 5551ci Copier?. Here in this article, we are sharing a few methods to fix the error code C2840 on the Kyocera TASKalfa copier. Read this article to know the ways to fix the C2840 error and the causes behind this error code.
Meaning of the error code C2840 on Kyocera 2551ci
The error code C2840 in Kyocera 3551ci Copier stands for Belt cleaning motor error. This is a primary transfer unit-related error code. This can either be due to a problem with the transfer contacts or maybe a problem with the motor rotating the belt.
Solution for the Machine failure C2840 code
Check the transfer unit: Check if the transfer unit is installed properly or not. Reinstall it. Also, remove the waste toner on it.
Check the connector: The connector is located below the fuser unit. Check if it is properly seated or not. Remove the connector and reconnect it.
Check the Transfer Belt motor: Check if the transfer belt cleaning motor is properly working or not. Replace the motor if it is defective.
Clean the transfer unit contacts and seating arias
Check and clean the waste toner in the transfer unit cleaning section.
If the error still persists, then check the following
Check the Engine PWB
Upgrade the engine firmware
Check the feed image PWB
COMMENTS