Ricoh MP C4502/C3002 is showing “Fusing Roller needs to be replaced now" call for service

Ricoh MP C4502/C3002 is showing “Fusing Roller needs to be replace now" call for service. Are you getting the status as “Fusing Roller needs to be replaced now” signal on your Ricoh Aficio copier? These instructions describe solution for how to fix Fusing Roller counter in Aficio MPC3002, MPC4502, MPC5502 and MPC3502 series copier machine. This should solve your problems. The article you can save a lot of money by resetting the service call Fusing Roller counter. We are sharing a few methods to fix the error, so check them one by one until it gets solved.

Ricoh Aficio mpc3502, mpc4502, mpc3002 clear service call “Fusing Roller needs to be replaced now”

Are you getting the status as “Fusing Roller needs to be replaced now” signal on your Ricoh Aficio copier? These instructions describe a solution for how to fix Fusing Roller counter in Ricoh MPC3002, MPC4502, MPC5502 and MPC3502 series copier machine. This should solve your problems. The article you can save a lot of money by resetting the service call Fusing Roller counter. We are sharing a few methods to fix the error, so check them one by one until it gets solved.

The maintenance sign means that the copier needs to be well serviced and checked if something is to be replaced. Consumables such as Toner, Drum, Blade, Fuser rollers, Pickup roller, and Developer are changed at such times. And also check the changing consumables are original or not. Always use spares having good quality. If you are sure that you have replaced the correct part or nothing is to be replaced, after ensuring these things, you can proceed to clear the sign. Always call experienced technicians for service.

Mining of the “Fusing Roller” service call signal.

This usually means service called “the fusing roller needs to be replaced now" the consumable parts have reached the end of their service life. It requires fusing roller worn-out replaced. The fusing roller has set the number of copies pages in copier memory. When the part reaches 300k the number of copies, a message appears on a copier screen telling you “the fusing roller need replaced". It's not your fault. If the printed pages are ok, you can continue to use it, but you need to reset the counter. If the copy quality is still ok, you should be able to continue to use the machine as normal. If you have a problem printing or copier when the maintenance codes are displayed then the first way is to have the parts replaced and reset the maintenance counters for you, the service call “Fusing Roller” you will need to be reset after it’s installed. Below is the video guide to reset Fusing Roller counter in Ricoh mpc3502, mpc4502, mpc3002