Are you getting the status as Spanner indication on your Toshiba E Studio copier? These instructions describe error Spanner key solution for a Toshiba E Studio 166 163, 166, 181, 195, 211 copier machine. This should solve your problem. We are sharing a few methods to fix the error, so check them one by one until it gets solved.
Toshiba E Studio 166 163, 166, 181, 195 and 211 reset Spanner key
 |
| How to clear spanner indication in Toshiba e Studio 181, 195 and 211 |
Meaning of the Spanner indication Error:
This usually means Spanner's key error is on the machine is working fine which means drum unit Life is over or it makes over 75000 paper reached the end of their service life. Do not worry if you get this error, in some rare cases you can solve it by a very simple process. When you replace it u can reset. Follow these steps.
Maintenance sign means that the copier needs to be well serviced or something has to be replaced like Consumables such as drum, blade, fuser rollers, and developer, etc. If you are sure that you replaced the correct part, or the machine doesn't need to replace any part, then you can continue to clear the sign.
How to reset Spanner indication:
Follow this procedure to clear the Spanner icon sign:
- Switch off the machine while holding down “0 & 8” buttons Switch on the copier when Ad shows on the display, input “251” then press the “start button”, if the value is not 0, make sure that value is 0 buttons and press the interrupt, then switch off and on again your problem will be solved.
I hope this was helpful, don’t forget to share it via any of the share buttons on this page are highly welcomed as well.
Sir ido same method as u shown but it is not working.plz tell anothet method.
ReplyDelete