how to solve C 3913 error in konica minolta Bizhub C6500, C6000, C7000

Konica Minolta Bizhub c6500 error code C-3913 

This article is about how to solve C-3913 error code in Konica Minolta C6500, C6501, C6000, C7000, C5501 and C5500 Konica Minolta c6500. This should solve your problem. This article will help you to troubleshoot some common error messages to Konica Minolta error code C-3912, C3913 that you may receive any of the Bizhub C6500, C6501, C6000, C7000, C5501 and C5500 models, so check them one by one until it gets solved.

Maintenance sign means that the copier needs to be well serviced and checked if something is to be replaced. Consumables such as Toner, Drum, Blade, Fuser rollers, Pickup roller and Developer are changed at such times. And also check the changing consumables are original or not .Always use spares having good quality. If you are sure that you have replaced the correct part or nothing is to be replaced, after ensuring these things, you can proceed to clear the sign. Always call experienced technicians for servicing.



Mining of the C3913 error code.

C 3913 error in Konica Minolta is fuser related error which is meant for fuser not fixed properly. because the entire fuser unit when it is pushed into the machine and doors are closed the fuser electrical connections are not making contact the pull out the fuser unit and check all electrical connection also check the back of the copier where it plugs into anything there and check broken connectors doing what you did will not resolve this issue when the fuser is place back in make sure it is seated properly. If first time occurs, you need to go into service and clear the error then reset. Easy to reset and fault usually goes away. Below is the video guide to reset C-3913 error code in Konica Minolta c6500.






I hope this was helpful, don’t forget to share it via any of the share buttons on this page are highly welcomed as well.

0 comments:

Note: only a member of this blog may post a comment.