Error Code E000012 reset Canon IR advance C7270, C7260

Error Code E000012, E012-0501, E012-0502 E012-0503, E012-0504, E012-0505 reset Canon IR advance C7270, C7260, C7065 and C7280 copier machine.

Canon IR advance C7270, C7260 Error Code E000012 reset

Error Code E000012 reset Canon IR advance C7270, C7260

These instructions describe the error code E000012 solution for a Canon IR advance C7270, C7260 copier machine. The following instructions describe how to reset E00012 for a Canon IR advance C7065, C9270 C7280, C7270, C7260, C5255, and C5200 series copier machine. This introduction will help you to troubleshoot some common error messages related to E012-0501, E012-0502 E012-0503, E012-0504, E012-0505, and E012-0506 that you may receive. We are sharing a few methods to fix the error, so check them one by one until it gets solved.

Meaning of the E000012 Error Code:

The E000012 error code refers to the ITB Driver motor or Drum motor, rotation error. ITB or Drum, the drive motor is not rotating at the specified speed. Maybe something keeping the motor from running, like an up twisted blade with drum unit or ITB unit. If the waste toner driver or cleaning assembly is binding the error code could occur. Refer to E075 if the ITB is displaced.

The maintenance sign means that the copier needs to be well serviced and checked if something is to be replaced. Consumables such as Toner, Drum, Blade, Fuser rollers, Pickup roller, and Developer are changed at such times. And also check the changing consumables are original or not. Always use spares having good quality. If you are sure that you have replaced the correct part or nothing is to be replaced, after ensuring these things, you can proceed to clear the sign. Always call experienced technicians for service.

How to fix E00012 Error Code:

To resolve this issue, there are 4 wheels and 4 encoder sensors on the main drive box, give them all a good clean the encoder sensors, wheel can be a fiddle to get off. Check the Drum and cleaning blade, ITB cleaning Blade and if the Drum is ok to check and replace Drum Driver motor.

encoder sensors

• Check the drum unit.
• Check the ITB unit.
• Check the Drum and ITB Driver motor.
• Check encoder sensors.
• Check the gear with Drum motor.
• Check its connectors.

If you find your parts, then replace the parts and error still remains, after automatically reset the error code. If the error is still showing even after the above solutions, then you have no choice other than calling Canon service technician.

I hope this was helpful, don’t forget to share it via any of the share buttons on this page are highly welcomed as well.