how to solve error code E01-22 on Panasonic DP-8016P

Panasonic DP-8016P error code E01-22 reset

Here is an article on how to fix error Code E01-22 in your Panasonic DP-8016P copier, which should solve your problem. We are sharing a few methods to fix the error code E01-22 on Panasonic DP-8016P copier, so check them one by one until it gets solved…




Maintenance sign means that the copier needs to be well serviced and checked if something is to be replaced. Consumables such as Toner, Drum, Blade, Fuser rollers, Pickup roller and Developer are changed at such times. And also check the changing consumables are original or not .Always use spares having good quality. If you are sure that you have replaced the correct part or nothing is to be replaced, after ensuring these things, you can proceed to clear the sign. Always call experienced technicians for servicing.

Fix the error code E01-22 on Panasonic DP-8016P

This error E01-22 means is wrong with the polygon motor synchronization. Do the very thorough cleanout first for sure. Sometimes the mirror on the polygon motor that deflects the laser beam, that has to go through a glass before hitting the drum, is fogged or something, but the glass it has to go through is cleanable and should in such a case be cleaned for sure. This will require a service technician to repair
·        Polygon Motor connector disconnected.
·        SPC PCB connector disconnected.
·        LSU connector disconnected.
·        Polygon Motor defective.
·        PS defective.
·        SPC PCB defective.




I hope this was helpful, don’t forget to share it via any of the share buttons on this page are highly welcomed as well.

0 comments: