How to remove error E000202 on Canon ir2525

Error code E000202 solution for Canon ir2525

These instructions describe error code E000202 solution for a Canon ir2525, iR2520, iR2530, iR2535, iR 2540 and iR2545 series Copier. We are sharing a few methods to fix the error E202, so check them one by one until it gets solved.




Maintenance sign means that the copier needs to be well serviced and checked if something is to be replaced. Consumables such as Toner, Drum, Blade, Fuser rollers, Pickup roller and Developer are changed at such times. And also check the changing consumables are original or not .Always use spares having good quality. If you are sure that you have replaced the correct part or nothing is to be replaced, after ensuring these things, you can proceed to clear the sign. Always call experienced technicians for servicing.

Fix the error code E000202

The error code E000202 is for the scanner does not return to the home position for vertical scanning within a specific time. The home position sensor of scanner doesn't go of when the lamp is in home position, remove copy board glass, slide scanner towards right side, under copy board glass on left side rear corner there is a black sensor which will look the shape 'F'-side view clean the cavity between two horizontal arms of 'F' shape sensor with a soft painting brush.




Some possible cause

·        Clean the home position sensor.
·        Check the scanner lamp.
·        Check connection.
·        Check the reader unit.

0 comments: