Here in this post I explain How to fix error code C-4401 in your Konica Minolta bizhub 501 copier. If your machine is under maintenance you should call them to have it replaced. This introduction will help you troubleshoot some common error C-4001, C-4101 on your bizhub 361, 420, 421, 500 models. We are sharing a few methods to fix the error, so check them one by one until it gets solved.
Konica Minolta bizhub 501 error code C-4401 problem solutions
Here in this post, I explain how to fix error code C-4401 in your Konica Minolta bizhub 501 copiers. If your machine is under maintenance you should call them to have it replaced. This introduction will help you troubleshoot some common error C-4001, C-4101 on your bizhub 361, 420, 421, 500 models. We are sharing a few methods to fix the error, so check them one by one until it gets solved.
Meaning of the error code
Meaning of the error code
The C-4401 codes mean the Polygon motor in the Print Head Assembly fails. Inside the laser, there is a motor called the Polygon Motor, which has a very high speed of 35000 plus rpm. This code will not reset from the panel.
Some Possible causes:
- Check the connections to the laser unit. Unplug and re-plug all connections, and if the problem persists, you have to replace the Polygon motor or laser unit.
- Laser drive board
- Printer control board
I hope this was helpful, don’t forget to share it via any of the share buttons on this page are highly welcomed as well.
COMMENTS