These instructions describe error code C-6102, c6103, C6104 and C6105 solution for a Konica Minolta bizhub C224e, C284e, and C364e Copier series. We are sharing a few methods to fix the error, so check them one by one until it gets solved.
Konica Minolta bizhub C224e, C284e and C364e error code C-6102 reset
These instructions describe error code C-6102, c6103, C6104 and C6105 solution for a Konica Minolta bizhub C224e, C284e, and C364e Copier series. We are sharing a few methods to fix the error, so check them one by one until it gets solved.
Meaning of the C-6102 Error Code:
Konica Minolta C224e error C-6102, c6103, C6104, and C6105 codes scanner home sensor cannot detect the scanner located in its home position. The scanner home sensor cannot detect a scanner even when the scanner motor is turned on to move the scanner to the maximum travel distance. Turn off the Power and back on and see if it works. If not working check the scanner drive cable or pulley, gear, and belt.
Some possible causes:
- Check the PC 201, M 201, PCB-IC and PCB-C connector for proper connection and repair as needed.
- Replace the scanner motor.
- Check the scanner drive board.
- Check the printer control board.
If you find your parts, then replace the parts and error still remains, after resetting the error code.
If the error is still showing even after the above solutions, then you have no choice other than calling Konica Minolta service technician.
COMMENTS