Kyocera TaskAlfa 180 error code c6000

Kyocera TaskAlfa 180 error code c6000. In this article I explain how to fix your Kyocera TaskAlfa 180 Error Code c6000. This article will help you solve some common error messages related to C6000, C602O, and C6050 error codes, which you can get any Kyocera TaskAlfa 180, TaskAlfa 181, TaskAlfa 220, TaskAlfa 221 models.

Error code C6000 on Kyocera TaskAlfa 180

In this article, I explain how to fix your Kyocera TaskAlfa 180 Error Code c6000. This article will help you solve some common error messages related to C6000, C602O, and C6050 error codes, which you can get any Kyocera TaskAlfa 180, TaskAlfa 181, TaskAlfa 220, TaskAlfa 221 models.

Meaning of C6000 error code:

Kyocera 180 error code C6000 is displayed when your machine fails to reach the correct temperature at a specific time. Temperature does not reach 70 ° C / 158 ° F for 15 seconds before secondary stabilization. In some cases, you can solve the error code C6000 by resetting it or when it is a false error, can’t be reset it and may also require new parts.

How to fix C6000 error:

To reset this error, do the following

1. Press the number key on “10871087” and the display should blink.
2. Press the “163” and press the “Start” key.
3. Then display the screen for “CLE” and press the “Start” key Press one more “start” key
4. Then Turn off the power switch, wait 20 seconds and power up the machine, and the code should reset.

If the error code C6000 reappears. So, you should pick up the fuser unit and check. Check if the thermostat is open. After replacing the thermostat or cleaning the thermistor, put the fuser unit back into the machine after resetting the error code. Check if this code appears at a low power state below 115V.

I hope this was helpful, don’t forget to share it via any of the share buttons on this page are highly welcomed as well.