This article is about how to fix error c4012 on your Kyocera TaskAlfa 3551ci, 3050ci, 3550ci, 4550ci, 5550ci, and 3005ci copier machine. The error code will vary depending on the polygon motor of the affected laser unit. C4011 K Polygon motor. C4012 C Polygon motor. C4013 M Polygon motor. C4014 Y Polygon motor.
Kyocera taskalfa 3551ci error code c4012 solutions
This article is about how to fix error c4012 on your Kyocera TaskAlfa 3551ci, 3050ci, 3550ci, 4550ci, 5550ci, and 3005ci copier machine. We are sharing a few methods to fix the error c4012 on Kyocera TaskAlfa series copier, so check them one by one until it gets solved.
I hope this was helpful, don’t forget to share it via any of the share buttons on this page are highly welcomed as well.
Meaning of c4012 Kyocera TaskAlfa error Code:
Kyocera TaskAlfa error Code C4012 refers to the Cyan Polygon motor that is not stabilized within 10 s since the motor is activated. Polygon motor synchronization problem within the laser unit. This message cannot be cleared until you have repaired or replaced the cyan laser unit. The error code will vary depending on the polygon motor of the affected laser unit.
- C4011 = Black (K) Polygon motor.
- C4012 = Cyan (C) Polygon motor.
- C4013 = Magenta (M) Polygon motor.
- C4014 = Yellow (Y) Polygon motor.
Fix the error code:
- Poor contact with polygon motor connector terminals. Re-insert the connector. Also, check the continuity inside the connector cable. If there is none replace the cable.
- Check the polygon motor and Replace cyan polygon motor or Laser unit.
- Replace the engine PCB.
COMMENTS