How to reset error code E0000-0000 on Canon iR advance C5045, C5030, C5250

how to fix Error E0000-0000 on your Canon iR advance C5051/C5045/C5035/C5030/C5250. Error codes from E0000 to E0004 are all related to the fixing unit. If you get this error, don't worry, in some cases, you can fix it with a simple process. Follow these steps

Canon iR advance C5045, C5030, C5250 reset error code E0000-0000

How to reset error code E0000-0000 on Canon advance C5045, C5030, C5250

This article contains information that shows you how to fix Error E0000-0000 on your Canon IR-adv c5030/C5051/C5045/C5035/C5250. Error codes from E0000 to E0004 are all related to the fixing unit. If you get this error, don't worry, in some cases, you can fix it with a simple process. Follow these steps

The maintenance sign means that the copier needs to be well serviced and checked if something is to be replaced. Consumables such as Toner, Drum, Blade, Fuser rollers, Pickup roller, and Developer are changed at such times. And also check the changing consumables are original or not. Always use spares having good quality. If you are sure that you have replaced the correct part or nothing is to be replaced, after ensuring these things, you can proceed to clear the sign. Always call experienced technicians for service.

Meaning of the E0000-0000 error code

The E0000-0000 error code is for the Fuser unit not getting to the correct temperature in a specified time. The problem with a fixing unite could be a fixing film. You may have a bad power problem on the wall outlet if it is not the right voltage, which can damage the copier. If this happens the first time, you can reset to service mode. It is easy to do.

How to fix canon c5045 error code e0000-0000

Follow these steps to fix your problem:

1. Press the Additional Functions (*) button.
2. Then press 2 and 8 buttons at the same time.
3.  Press again the Additional Functions (*) button.
4. The service mode should appear on the screen.
5. Select COPIER, which will give you some options on top.
6. Select FUNCTION.
7. Select CLEAR on the list.
8. Select ERROR from the next list and press OK.
9. Turn off the machine from the main switch for about a minute and restart it.

Even if the above fixes are shown in error code. Then check these all things.

Some of the possible causes.

•  Check the fuser lamp.
• Check the fuser film.
• Check thermistor.
• Check the connector of the fixing film unit.
• Replace the DC controller PCB.

After you replace the part, then you have to reset the machine in service mode COPIER

I hope this was helpful, don’t forget to share it via any of the share buttons on this page are highly welcomed as well.