Fix toner indicator message error on sharp ar-5316

sharp ar-5316 toner indicator message error solution

Fix toner indicator message error on sharp ar-5316

Here in this post, I explain How to fix toner indicator message error on sharp ar-5316/AR 5015/AR-5015/AR--5620/AR-5136/AR-5320 models’ copier. We are sharing a few methods to fix the toner indicator error, so check them one by one until it gets solved.

The maintenance sign means that the copier needs to be well serviced and checked if something is to be replaced. Consumables such as Toner, Drum, Blade, Fuser rollers, Pickup roller, and Developer are changed at such times. And also check the changing consumables are original or not. Always use spares having good quality. If you are sure that you have replaced the correct part or nothing is to be replaced, after ensuring these things, you can proceed to clear the sign. Always call experienced technicians for service.

Solution for toner indicator message error

The Toner Indicator means Toner cartridge replacement required indicator. The toner cartridge comes with an on-chip sensor that measures toner life. If the toner goes empty, it returns a red indicator message error triangle that warns that the toner is empty, at which point, you need to replace the toner cartridge. If you refill the toner, If the machine is working after changing the toner, there is no need to change the toner chip, otherwise, the same indication still exists, you need to change the toner chip. The machine is still flashing the toner indication, you need to reinstall it properly.

Some possible causes.

• Replace the toner cartridge.
• Check toner gear at the end.
• Check your developer unit gear.
• Replace the developer.

I hope this was helpful, don’t forget to share it via any of the share buttons on this page is highly welcomed as well.