RICOH MP C3002/ MPC3502/ MPC4502/ MPC5502/ mpc3054 Copier Fix Functional Problems Error SC460-00. The error code SC460-00 indicates separation power pack output error. this error will occur if the BCU identifies a short in the power pack 10 times at D(ac).
RICOH MPC3502 Fix Functional Problems Error SC460-00
How to fix the error code sc460-00 in RICOH mpc3502 |
The maintenance sign indicates that the copier needs to be well serviced and checked if something is to be replaced or not. Consumables such as Toner, Drum unit, Fuser unit, rollers, and Developer unit are changed at such times. And also check these are original or not. Always use spares to have good quality. If you are sure that you have replaced the correct part or nothing is to be replaced, after ensuring these things, you can proceed to clear the sign. Always call experienced technicians for service.
Method to solve “SC460-00” error
The error code SC460-00 indicates separation power pack output error. this error will occur if the BCU identifies a short in the power pack 10 times at D(ac). SC460-00 the error may be because of dirty separation components that can be solved by cleaning. The code indicates the following:
Some possible causes
- Check high voltage supply cable, replace it if needed.
- Check the high voltage power supply. Replace if needed.
- Replace IOB.
- Check transfer unit is properly or not.
- Check the input/output connector.
- Check input/output harness.
- Check HVPS.
- Check BCU, replace it if needed.
If the error persists despite this procedure, it is better to call a Ricoh technician
I hope this was helpful to you. Comment below your feedback if this is useful for you
COMMENTS