The trouble code c-2152 means image Transfer belt unit retraction failure or Sensor plate.
Konica Minolta c220 error code c-2152 solutions
Here is an article on how to fix trouble code c-2152 in your Konica Minolta bizhub c220. C280, c360 copier. We are sharing a few methods to fix the error c2152 on bizhub c220. C280, c360 series, so check them one by one until it gets solved.
The maintenance sign means that the copier needs to be well serviced and checked if something is to be replaced. Consumables such as Toner, Drum, Blade, Fuser rollers, Pickup roller, and Developer are changed at such times. And also check the changing consumables are original or not. Always use spares to have good quality. If you are sure that you have replaced the correct part or nothing is to be replaced, after ensuring these things, you can proceed to clear the sign. Always call experienced technicians for service.
Meaning of the trouble code c-2152
The trouble code c-2152 means image Transfer belt unit retraction failure or Sensor plate. Maybe the problem is due to the spilled-out waste toner it may block the transfer belt retraction sensor. Remove the transfer unit, clean the transfer belt retraction sensor, contacts, and the transfer unit contact. You can try resetting the code using the Trouble Reset procedure below
- switch OFF the main power.
- Turn the power switch ON while pressing the Utility/Counter button.
- you can see the ‘Trouble Reset' option on the display and touch it.
- Make sure "OK" is displayed and it is reset.
- then turn off the main switch and turn it on after 10 seconds and make sure the machine started correctly.
If the error is still showing even after above solutions, then you have no choice other than calling Konica Minolta service technician.
I hope this was helpful, don’t forget to share it via any of the share buttons on this page are highly welcomed as well.
Very bad...
ReplyDelete