How to solve Error Code SC860-00 in Ricoh MP C4503

Solution for the Error Code SC860-00 in Ricoh MP C4503 How to solve Error Code SC860-00 in Ricoh MP C4503 This article includes the solution...

Solution for the Error Code SC860-00 in Ricoh MP C4503

How to solve Error Code SC860-00 in Ricoh MP C4503

This article includes the solution for error code sc860-00 in Ricoh MPC3004, MPC3504, MPC4504, MPC6004, MPC3003, MPC3503, 4503, MPC5503, MPC6003. This article will help you to troubleshoot some common error messages to Ricoh error code SC925, SC872, SC873, SC870-08, SC860-00, SC865-01, SC997-00, SC990 that you may receive any of the Ricoh Copiers mentioned above. you can solve this error by following the methods given below. I hope this will be able to solve your problem.

Meaning of the error code sc860-00

The error code sc860-00 is the failure of a hard disc. Is an initialization error. The controller recognizes that the HDD is failed. This error is shown if it has a defective HDD or the HDD is not initialized or due to broken label data.

How to solve the error SC860-00

Method 1

• First Format the HDD. After formatting, you may lose everything stored in the document server.  You don’t need any internet connection or network connection for formatting the HDD. You can format the HDD in a few steps.

Method to format

Enter into service mode by pressing the “Yellow” button, then “806182” and then hold the 'C' button for 5 seconds. Now you are in service mode. Touch 'System SP’ on the screen. Then press '5832' and the '#' button. Now you can see many options on the screen. Select '1 HDD formatting (All)' from them and press 'Execute'. Then you will get a message of showing that the process is completed. Then turn off and ON the machine.

Method 2

• If this didn't work for you then you have to replace the HDD.

 

I hope this was useful to you. Please let me know your experience through the comments section.