RICOH MP C4503 Replacement of waste toner bottle
how to empty Ricoh waste toner bottle
This article describes how to clear the "replace waste
toner bottle" System Message from the Ricoh MPC3004, MPC3504, MPC4504,
MPC6004, MPC3003, MPC3503, 4503, MPC5503, and MPC6003 copier. We are discussing
the method to replace the waste toner box in this article. You can replace it
in very few steps. I hope this will be able to solve your problem.
Meaning of the error code “Replacement of waste toner bottle”
This System Message shows when the waste toner box is
completely full of waste toner and it needs replacement. This error code also shows when the sensor in
it is defective. The sensor is located
above the Waste Toner Box. The machine deposits the excess toner from the printing
process into this box to make the copy neet and clean. If the box fills up,
the sensor detects it and the machine shows this code. You need to replace the
waste toner box or empty the box. It is very easy to empty.
Method 1
Replacing waste toner box
You can see waste toner box by pressing the cover on the left side of the machine near the first tray. Now you can replace the waste toner box or you can empty the box and reinstall it
Caution
Note the leg of the sensor located above the waste toner box when replacing. Otherwise, it may break.
Method 2
Check the waste toner sensor
If the error still persists, you may need to clean the waste
toner sensor. The sensor is located above the waste toner box.
I hope this was useful to you. Please let me know your
experience through the comments section.
0 Comments