Do you experience the printer malfunction error code sc500 in your Ricoh Aficio mp 2000, SP 3400N, SP3410DN SP3410, SP3510SF, SP300, and SP3500 printe
ricoh aficio mp 2000 error sc500
Do you experience the printer malfunction error code sc500 in your Ricoh Aficio mp 2000, SP 3400N, SP3410DN SP3410, SP3510SF, SP300, and SP3500 printer? Don't worry. In this article, we are describing the causes and solutions for the sc500 error code in the Ricoh SP3410DN printer. You can solve this Ricoh Printer sc500 error message on your own without any difficulties through the detailed steps given below. I hope this will be able to solve your problem.
Meaning of the error code sc500
The error code sc500 indicates the Main motor error in Ricoh printers. The printer is unable to recognize a main motor lock signal within 2 seconds after the main motor started working, or the printer is unable to recognize the motor lock release signal within 2 seconds after the printer stops working or turned off. There may be various reasons for causing this error code. The main reason behind this error may be an overload of the drive mechanism. The other reasons may be,
- Damaged or defective main motor.
- Defective or loose motor harness.
Solutions
- Unplug your printer and then switch on it again.
- Check the Drum unit.
- Check the harness, replace it if necessary.
- Check the main motor and clean it. Replace the main motor if necessary.
I hope this was useful to you. Please let me know your experience through the comments section.
COMMENTS