call service 7410 kyocera fs-2000d solution

 

how to clear call service 7410 in Kyocera fs3540mfp

The Kyocera fs3540mfp is a B/W printer that has key features like a large control panel with a touch screen and a speed of 30ppm. It has the facility for secure id card access. Also, it needs very low maintenance.

Solutions for the call service 7410 in Kyocera fs3540mfp

In this article, we are explaining the solutions for the call for service 7410 in Kyocera FS3040MFP, FS3540, FS3140MFP, and FS1130MFP printer. We will tell you the solution and the causes behind this error code. You can easily solve it through the following methods. I hope it will help you to get rid of the error code easily.

What does the call service 7410 indicates?

The error code call for service 7410 in Kyocera fs3540mfp printer stands for Drum unit non- installing error. The error displays when you not inserted a drum unit in your printer or the Drum unit is not inserted properly. It also occurs if the drum PWB EEPROM is not done communicating properly. There may be some causes behind this error,

• If the drum unit is not inserted or the drum unit is not properly inserted.
• Damaged drum PWB EEPROM.
• Damaged connector cable.
• lack of or poor contact in the connector.
• Damaged engine PWB.

How it can be solved?

1. Install the drum unit properly.
2. Check the connectors drum PWB (YC1) and Connect-L PWB (YC3).
3. Reinstall the connector. Check the connector cable and check the continuity within the connector cable. Replace it if necessary.
4. Check the drum PWB EEPROM.
5. Check the engine PWB, replace it if necessary.

 

I hope this helps you.  If the error persists after doing the above solutions, you should contact the Kyocera Customer Service Team for the assistance of an expert.

Share your experience with us through the comment section.