samsung xpress c460fw transfer belt reset

What is a transfer belt error on a Samsung Xpress printers?.The Replace transfer belt error is displayed when the life of transfer belt ends.

 

how to reset Samsung sl c460 transfer belt

The Samsung Xpress SL-C430w, SL-C480FW, and SL-C480W color laser multifunction printer is a nice small office printer. This is a wireless printer. It gives fast and good quality prints.

Solution for Samsung printer transfer belt error

In this article, we are describing the procedure for Replacing the transfer belt in Samsung Xpress SL-C430w, SL-C480FW, and SL-C480W. This error usually comes in every printer when they do lots of work. I hope you can easily replace the transfer belt through the methods given below.

What is a transfer belt error on a Samsung printer?

The Replace transfer belt error is displayed when the life of transfer belt ends. The ITB unit (Mfr PN: JC93-01540, Mfr PN: JC93-01540A) has a certain limit of prints. The Samsung C430w printer's transfer belt has a limit of 20,000 pages. After the limit the life of the transfer belt become ends. so, you should replace the transfer belt. Else, you can't continue your printing. 

You can't reset the transfer belt count. Replacing is the only solution for this error. You are able to reset the fuser count. Always use the original transfer belt in your printer. Because it gives prints with better quality.

Method for replacing the transfer belt in Samsung printer

1. Turn off your printer first.
2. Then open the front cover and remove the toner cartridges and waste toner container.
3. After that remove the drum unit. As soon as you remove the drum unit put it into a bag to avoid exposure to light.
4. Then disconnect the transfer belt.
5.  Close the front cover and open the back door.
6. Now at this point, we need to open the fuser cover by pulling the white livers. It releases the transfer belt.
7. Now open the front cover again and pull the transfer belt out.
8. After that install the new transfer belt.
9. Put back all the parts like Drum unit, waste toner container, toner cartridges, etc. Now turn ON your printer.

If the error still continues after replacing the ITB unit, then follow the method given below.

Turn off and unplug your Samsung c430w printer. Wait for a minute. After that plugin and turn on your printer. Check if the error is gone or not. This process will disappear this error in your printer.

I hope this helps you.  If the error persists after doing the above solutions, you should contact the Samsung Customer Service Team for the assistance of an expert.

Please let's know your feedback through the comment section.