Are you getting the Error Code E-607-0000 currently on your Canon ir5050, ir5075, ir5570, ir5065, and ir6570 That means the drive did not get enough
Canon iR6570 error code e607
Are you getting the Error Code E-607-0000 currently on your Canon ir5000, ir5050, ir5075, ir5570, ir5065, ir6000, ir6075i, and ir6570? Do you want to fix the error code E-607 that appears on your Canon copier? Read this article to know the ways to fix the E-607 error from your copier and the causes behind this error code.
Meaning of the error code E-607
The error code E-607 means that there is an error in the cooling fan (FM7) that cools the hard drive. That means the drive did not get enough cooling from the fan. This is a serious error that could affect the life of the hard drive. So, fix it quickly to protect the Hard drive. The following are some causes behind this error code
Solution for the error code E-607-0000
- Check the fan that cools the hard drive is working properly or not. Replace it if necessary.
- If the hard drive is defective. This error code also occurs if the hard drive is damaged.
- In case of wiring damage or malfunction
- If the DC controller PCB is defective.
If it is replaced, then make sure that it doesn't
overheat.
- Check the hard drive.
- Check the wiring.
- Check the DC controller PCB.
I hope this helps you. If the error persists after doing the above solutions, you should contact the Canon Service Team for the assistance of an expert. They will assist you to get rid of this issue.
COMMENTS