How to Fix Machine Failure C5102 in Kyocera 3253ci

Solution for error code C5102 Kyocera 3253ci

How to Fix Machine Failure C5102 in Kyocera 3253ci

Are you encountering Machine Failure C5102 or relative codes such as C5103, C5103, and C5104 on your Kyocera TASKalfa 2553ci, 3253ci, 4053ci, 5053ci, 6053ci printer? Don't worry, we've got you covered. In this article, we'll guide you through the steps to diagnose and fix error code C5102 in Kyocera 3253ci

What is Error Code C5102 in Kyocera 3253ci

The error code C5102 indicates a Cyan The composite power supply PCB reports a high-voltage error when the output for cyan primary charging deviates from a specific voltage level."

• Defective the cyan charge roller
• The contact has a poor connection
• Defective Main High-voltage PWB

The  sub codes of C5102 indicates the high-voltage error, following are the related error codes:

1. C5101: BK HVT
2. C5102: C HVT
3. C5103: M HVT
4. C5104: Y HVT

Solutions for Error Code C5102 in Kyocera 3253ci

1. Check and Replace the cyan Charge Roller: Inspect the cyan charge roller (located in the drum unit as attached to the drum) and replace it if necessary.
2. Inspect and Replace the Drum Unit: Check the drum unit and replace it if it's not properly rotated.
3. Examine the Main High-Voltage PWB: Inspect the Main High-Voltage PWB for any issues.

By following these steps, you should be able to resolve the Machine Failure C5102 error code on your Kyocera C5053 printer. If the issue persists, contact a Kyocera authorised service provider for further assistance.