How to solve my Kyocera Taskalfa 1800 ask to "add toner" problem

Kyocera TaskAlfa 1800 add toner error solution

How to solve my Kyocera Taskalfa 1800 ask to "add toner" problem

How to solve my Kyocera Taskalfa 1800 ask to add toner even though the toner was full and did not work. The following instructions describe how to reset add toner error for a Kyocera TaskAlfa 1800, 1801, 2200 and 2201 copier machine. We are sharing a few methods to solution the problem, so check them one by one until it gets solved.

Meaning of the add toner Error:

Kyocera Taskalfa is showing add toner on its screen even after another toner has been fixed. Kyocera products are very particular when it comes to the toner used if you are using toner that is not model specific Kyocera Taskalfa toner you can have this problem you can try Kyocera Taskalfa toner now but you may have destroyed the developer in which case you need fresh dev and model specific Kyocera Taskalfa toner don't use toner that says for use in look for the Kyocera Taskalfa logo on the box.



How to fix the add toner problem:

Resolve this problem you have to choice if the first one didn't work gone to the next one. Do the following procedure to reset the error:-

1.     You either got a bad toner (the chip on it is telling it is bad). Open the front cover and replace it with the new toner then close the front cover. Make sure new toner is shaking well.
2.     You must use OEM toner if you haven't been then you have to empty developer unit and start with OEM toner.
3.     Replace the toner chip.
4.     developer unit probably went bad




  I hope this was helpful, don’t forget to share it via any of the share buttons on this page are highly welcomed as well.

1 comment:

  1. Sir plzz send me the driver of kyocera teskalfa 1800 ... my email is chomorik2016@gmail.com

    ReplyDelete