change the toner cartridge Sharp mx. 1. Open the front cover. 2. Take the new toner cartridge from the box. Grasp the cartridge on both sides and shake horizontally 4-5 times. 3. Shake the toner cartridge well to ensure that the toner flows well and will not stick to the cartridge. 4. Gently insert the new toner cartridge on the level. 5. Close the front cover.
Sharp MX copier toner cartridge replacement
This document provides the procedures on how to change the toner cartridge in Sharp mx2614n, MX-3114n series copier. To view the approximate amount of toner remaining, continually touch the “COPY” key during printing or when the machine is idle. The percentage of toner remaining will appear in the display while the key is touched. When the percentage falls to "25-0%", obtain a new toner cartridge and keep it ready for replacement. Below is the procedure for Toner cartridge replacement on a Sharp MX copier.
- Step 1: Open the front cover.
- Step 2: Hold the Toner cartridge with hand and slowly pull it out. (After removing the toner cartridge, do not shake it or tap on it. Doing so may cause toner to leak from the cartridge. Put the old cartridge immediately in the plastic bag and store it. Do not throw the toner cartridge into a fire. Toner may spill and cause a fire.
- Step 3: Take the new toner cartridge from the box. Grasp the cartridge on both sides and shake horizontally 4-5 times.
 |
| sharp mx-23ft toner cartridge |
- Step 4: Gently insert the new toner cartridge on the level.
 |
| Sharp MX copier toner cartridge replacement |
- Step 5: Close the front cover.
I hope this was helpful, don’t forget to share it via any of the share buttons on this page is highly welcomed as well.
If we take all the steps and it still write change the tuner BK and we already changed it.And we follow all the steps.what next
ReplyDelete