This article contains the solution for the functional problem Error code SC554-02 in Ricoh MP C3003, MP C3503, MPC4503. error code is related fixing
Ricoh MP C4503 error code SC554-02
How to reset error code SC554-02 Ricoh MPC3503 |
This article contains the solution for the functional problem Error code SC554-02 in Ricoh MP C3003, MP C3503, MPC4503, MP C5503, MP C6003 series copier. This error code is related to the fusing unit, you cannot reset the error code unless you change it. We are sharing a few methods, so check it out until it gets solved.
Meaning of the error code sc554-02
The fault SC554-02 occurs in the fusing unit, which reaches the end of life. You cannot reset unless you change the fuser unit or the Pico fuse. You must first change the fuser unit or the Pico fuse to reset the error. it’s better to replace the fuser unit if not parts like fuser lamp, Thermistor, thermostat, Fuser Film may be damage. follow the steps below for resetting the error code after replacing the fusing unit or the Pico fuse.
- First press the “Yellow” button and press the “8,0,6,1.8,2” then press and hold the “C” button for 5secons.
- Now you can see service mode on the display then touch the “System SP”
- Then press “5810 (SC Reset)”, and press the “#” button.
- Touch the line down arrow option on the screen and select “(2) Hard High Temp Detection” and press “EXECUTE” now you can see “Completed” on the display.
- Then press exit and turn off and on the machine.
Ricoh Pico fuse |
If the error is showing even after resetting it. Then check them all out.
Some possible causes.
- Replace the fusing unit or Pico fuse.
- Check the harness between the fusing unit and BCU.
- Check the BCU or PSU (AC Controller board).
Excellent Information TQ
ReplyDeleteAll the method are used except change the fusing unit or pico unit because this is not available in Pakistan so what can I do please tell me suggestion....
ReplyDeletemuy bueno
ReplyDelete