how to fix Konica Minolta C353 trouble code C-1183

Fix trouble code C-1183 in Konica Minolta C353 

how to fix Konica Minolta C353 trouble code C-1183

This article contains the cause and solution for the error code c-1183 in Konica Minolta bizhub C203, bizhub C253, and bizhub C353 copier. Here are some common solutions to solve this error code. I hope this will be able to solve your problem.

Meaning of the Trouble Code C-1183

This Trouble code C-1183 is related to the finisher unit of the machine. This error is the finisher exit tray elevator motor failure or elevator motor drive malfunction. Usually, the failure of motor is not the cause of this error. It may be due to the unstable exit tray unit. So it is unable to move properly. These are the trays that activate the elevator home sensors. If these are not properly installed, it will fail to function. So they have to be adjusted properly. Check the following parts if the error code still shows. Replace it if necessary.

Some possible causes 

• Check the Exit tray motor and connector.
• Check the sensor and connectors.
• Replace PWB-A FN.
• Change FSCB.

I hope this was useful to you. Please let me know your experience through the comments section.