How to Clear Error Code e000007 for Canon iR3300 Series Copier

How to Clear Error Code e000007 for Canon iR3300 Series Copier. The E0007 error Code refers fixing film rotation issue. Fuser film sensor does not detect the rotation of the film for 6 sec or more while the fixing motor is driven. switch off machine and turn the power back ON in the right, if the problem did not solve, so please the steps below.

Canon Ir3300 Error Code E000007

Here is an article on how to fix Error Code E000007 in your Canon copier, which should solve your problem. We are sharing a few methods to fix the error E000007 for a Canon ir2200, ir2800, ir3300 copier machine, so check them one by one until it gets solved.

The maintenance sign means that the copier needs to be well serviced and checked if something is to be replaced. Consumables such as Toner, Drum, Blade, Fuser rollers, Pickup roller, and Developer are changed at such times. And also check the changing consumables are original or not. Always use spares to have good quality. If you are sure that you have replaced the correct part or nothing is to be replaced, after ensuring these things, you can proceed to clear the sign. Always call experienced technicians for service.

Meaning of the E00007 Error Code?

The E0007 error Code refers to fixing film rotation issues. The fuser film sensor does not detect the rotation of the film for 6 sec or more while the fixing motor is driven. switch off the machine and turn the power back ON in the rightif the problem did not solve, so please the steps below.

How to fix the E00007 Error Code?

Do not worry if you get this error, in some rare cases you can solve it by a very simple process. Follow the steps:
  • Check the fuser film: You have to remove the Fuser unit (FG6-6040-000) from the machine and manually rotate the gear. Either it’s torn or the little white patch at the end of the film is dirty. It may be worn-out. Simply change the fuser film with the new one. The code will remove.
  • Apply the grease or fuser oil: You can check the film is rotating or not rotating.  If not rotating grease inside the film may be dry. , remove all the old grease and apply new grease or fuser oil lightly. And now try to rotate.
  • Check the pressure roller: if not rotate properly the fuser Film then check pressure roller, rubber ring, and bush. It may be worn-out. Replace the cleaning roller of the pressure roller. If you have over 300 000 copies change the press roller, bushings and rubber ring. Change the cleaning roller or cleaning every 10-15K copy’s to prevent premature fixing problems.
  • Check the fixing film sensor is faulty:  This could be a dirty sensor. Or Check the connector of the fixing film

If you find your parts, then replace the parts and error still remains, after automatically reset the error code. If the error is still showing even after the above solutions, then you have no choice other than calling Canon service technician.

COMMENTS

BLOGGER: 2
  1. Dear sir,
    Sir when print copy will come out of the fuser unit paper is folding . Means paper come out full not any jam problem but paper folds in the centre of paper small folded lines and tonner also not set on folding area. I have changed fuser film , heating element,that orange colour roller also but still problem not solved . Sir pls give me a solution

    ReplyDelete
  2. Dear Sir,
    I have little bit query to you. I have changed best quality fuser film, Rotation is being well. when i make print Or scanning during that printing time then be issue error code 0007. please sir, give me a solution, its very necessary to fix this issue. machine is okay and ready. but i cant solving this problem while printing time being issue "error - 0007" "Machine - cannon ir 3300. i request to you sir, please fixed it......

    ReplyDelete

Name

brother printer,4,Canon copier,34,canon printer,11,Copier Drivers,1,copier reviews,2,Epson Printer,7,HP printer,1,Konica Minolta copier,21,Konica Minolta parts list,1,Kyocera Copier,18,Kyocera Drivers,1,MFP plotter,1,News,3,other solutions,1,panasonic copier,3,photocopier,7,printer,3,printer reviews,6,printer solutions,27,reviews,10,ricoh copier,23,Samsung printer,3,service and solution,140,Sharp copier,24,Sharp error codes,1,Toshiba copier,10,Xerox Copier,7,
ltr
item
CORONA TECHNICAL: How to Clear Error Code e000007 for Canon iR3300 Series Copier
How to Clear Error Code e000007 for Canon iR3300 Series Copier
How to Clear Error Code e000007 for Canon iR3300 Series Copier. The E0007 error Code refers fixing film rotation issue. Fuser film sensor does not detect the rotation of the film for 6 sec or more while the fixing motor is driven. switch off machine and turn the power back ON in the right, if the problem did not solve, so please the steps below.
CORONA TECHNICAL
https://www.coronatechnical.com/2019/08/error-code-e000007-canon-ir3300.html
https://www.coronatechnical.com/
https://www.coronatechnical.com/
https://www.coronatechnical.com/2019/08/error-code-e000007-canon-ir3300.html
true
5555816742389395798
UTF-8
Loaded All Posts Not found any posts VIEW ALL Readmore Reply Cancel reply Delete By Home PAGES POSTS View All RECOMMENDED FOR YOU LABEL ARCHIVE SEARCH ALL POSTS Not found any post match with your request Back Home Sunday Monday Tuesday Wednesday Thursday Friday Saturday Sun Mon Tue Wed Thu Fri Sat January February March April May June July August September October November December Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec just now 1 minute ago $$1$$ minutes ago 1 hour ago $$1$$ hours ago Yesterday $$1$$ days ago $$1$$ weeks ago more than 5 weeks ago Followers Follow THIS PREMIUM CONTENT IS LOCKED STEP 1: Share to a social network STEP 2: Click the link on your social network Copy All Code Select All Code All codes were copied to your clipboard Can not copy the codes / texts, please press [CTRL]+[C] (or CMD+C with Mac) to copy Table of Content