how to fix trouble code C-0202 error code in Konica Minolta Bizhub C224e, bizhub C364, bizhub C454, bizhub C554, bizhub C284e, bizhub C554e, bizhub...
Konica Minolta bizhub c224e Trouble Code C-0202
how to fix trouble code C-0202 error code in Konica Minolta bizhub C224e |
The maintenance sign indicates that the copier needs to be well serviced and checked if something is to be replaced or not. Consumables such as Toner, Drum unit, Fuser unit, rollers, and Developer unit are changed at such times. And also check these are original or not. Always use spares to have good quality. If you are sure that you have replaced the correct part or nothing is to be replaced, after ensuring these things, you can proceed to clear the sign. Always call experienced technicians for service.
Method to solve the trouble code C-0202
The trouble code C0202 shows a Paper tray lift motor error. it means paper jamming. The error code C0202 indicates paper jamming in tray 1, C-O204: Tray-2, C-0206: Tray-3, C-0208: Tray-4.
First of all, power off and unplug your copier, then empty paper from the problem tray and from the tray below it. Take out the problem tray, now you can see a paper jammed. Remove the paper by using a non-metallic item like a plastic ruler. Take out the dislodged paper by opening the tray below the problem tray. Push in the trays and power ON the Copier. This error may be due to wear and tear of the Pickup roller. So, it has to be replaced.
Some possible causes
- Check the lift motor and sensor, replace it if needed.
- Check the connector
- Check the paper tray is fully seated or not.
I hope this was helpful to you. Comment below your feedback if this is useful for you.
COMMENTS