This post is describing how to fix the “F1-00” error in Sharp MX2310U, MX5110N, MX-2301N, Sharp MX-2610N, MX-2600N, MX-3100N and MX-4100N Copiers.The error code F1-00 indicates Finisher communication error or Finisher trouble.
Sharp MX- 3100N Error Code F1-00 Solution
How to fix error code F1-00 in Sharp MX- 3100N |
The maintenance sign indicates that the copier needs to be well serviced and checked if something is to be replaced or not. Consumables such as Toner, Drum unit, Fuser unit, rollers, and Developer unit are changed at such times. And also check these are original or not. Always use spares to have good quality. If you are sure that you have replaced the correct part or nothing is to be replaced, after ensuring these things, you can proceed to clear the sign. Always call experienced technicians for service.
Method to solve F1-00 error
The error code F1-00 indicates Finisher communication error or Finisher trouble. The copier lost communication from the Finisher. I think the problem may be the Finisher connector socket in the machine is loose or the machine couldn’t get contact from it.
Some possible causes
- Check PCU PWB, replace it if needed.
- Check the connection between machine and finisher.
- Check Finisher PWB, replace it if needed.
- Check the connector harness.
I hope this was helpful to you. Comment below your feedback if this is useful for you.
COMMENTS