Are you getting the status as an FK2 signal on your display of Sharp MX-M364N, MX-M464N, and MX-M564N copier?. This maintenance code FK2 means fusing sub heat roller counter have reached the specified limit.
Sharp MX-M464N Reset the Maintenance Code FK2
Are you getting the status as a maintenance code FK2 signal on
your display of Sharp MX-M464N copier? These instructions describe a solution
for maintenance code FK2 on Sharp MX-M364N, MX-M464N, and MX-M564N monochrome
series copier machine. This code indicates that the fusing unit part has
reached its replacement interval. We are sharing a few methods to fix the
error, so check them one by one until it gets solved.
The maintenance sign means that the copier needs
to be well serviced and checked if something is to be replaced. Consumables
such as Toner, Drum, Blade, Fuser rollers, Pickup roller, and Developer are
changed at such times. And also check the changing consumables are original or
not. Always use spares to have good quality. If you are sure that you have
replaced the correct part or nothing is to be replaced, after ensuring these
things, you can proceed to clear the sign. Always call experienced technicians
for service.
What does this Maintenance FK2 mean?
This maintenance code FK2 means fusing sub heat
roller counter have reached the specified limit. It is time to replace the
Fuser heat roller. The fusing sub heat roller has a life of 150K life. If the
machine continues printing, you may see some paper jams in the fusing area. You
must replace the fusing sub heat roller to prevent damage or extra wear on the
Upper Heat Roller, as well as help, clean the Lower Heat Roller. After you
replace the part, then you have to reset the machine in service mode.
Reset maintenance code FK2
To reset the Fusing
web counter, go into simulation mode by pressing the following keys one after.
- Press the #, *, c, * button on the panel, you will be into service modes.
- Type simulation code “24” on the panel then press the start button.
- Then you want type sub-code “04” maintenance counter clear.
I hope this was
helpful to you. Comment below your feedback if this is useful for you
COMMENTS