This error shows that your machine needs servicing. The error sc400 is stands for ID Sensor adjustment error. This error occurs due to a dirty or weak ID sensor or ID sensor shutter of the image transfer belt.
Ricoh MP C2552 Error Code SC400 Solutions
How to solve error code sc400 in Ricoh mpc2552 |
The maintenance sign means that the copier needs to be well serviced and checked if something is to be replaced. Consumables such as Toner, Drum, Blade, Fuser rollers, Pickup roller, and Developer are changed at such times. And also check the changing consumables are original or not. Always use spares having good quality. If you are sure that you have replaced the correct part or nothing is to be replaced, after ensuring these things, you can proceed to clear the sign. Always call experienced technicians for service.
Meaning of “sc400” error code
This error shows that your machine needs servicing. The error sc400 is stands for ID Sensor adjustment error. This error occurs due to a dirty or weak ID sensor or ID sensor shutter of the image transfer belt.
Method to solve ‘sc400’
- Check the life of the Image transfer belt.
- Remove the ID sensor board very carefully. Clean the ID sensor with a soft cloth dampened by Alcohol. Don’t make scratches on it while cleaning.
- Replace the ID sensor if it is necessary.
- Check the Toner cartridge and Hoper.
I hope this was helpful to you. Comment below your feedback if this is useful for you.
I use Ricoh 2051, i have changed the ID Sensor, yet Sc400 is still showing.... I have carefully cleaned it, yet the error is still there. I have tried to clear the error and restart, yet it go away.... What else should i do?
ReplyDelete