How to solve error code sc400 in Ricoh mpc2552

Ricoh MP C2552 Error Code SC400 Solutions

How to solve error code sc400 in Ricoh mpc2552

Here in this post, I explain how to fix error code SC400 in Ricoh Aficio mpc2552 copier, which should solve your problem. This introduction will help you to troubleshoot the error code common in Ricoh Aficio MPC2550, MPC2050, and MPC2551, MPC2500 series. We are sharing few methods to fix the error, so check it out until it gets solved.

The maintenance sign means that the copier needs to be well serviced and checked if something is to be replaced. Consumables such as Toner, Drum, Blade, Fuser rollers, Pickup roller, and Developer are changed at such times. And also check the changing consumables are original or not. Always use spares having good quality. If you are sure that you have replaced the correct part or nothing is to be replaced, after ensuring these things, you can proceed to clear the sign. Always call experienced technicians for service.

Meaning of “sc400” error code

This error shows that your machine needs servicing. The error sc400 is stands for ID Sensor adjustment error. This error occurs due to a dirty or weak ID sensor or ID sensor shutter of the image transfer belt.

Method to solve ‘sc400’

• Check the life of the Image transfer belt.
• Remove the ID sensor board very carefully. Clean the ID sensor with a soft cloth dampened by Alcohol. Don’t make scratches on it while cleaning.
• Replace the ID sensor if it is necessary.
• Check the Toner cartridge and Hoper.

I hope this was helpful to you. Comment below your feedback if this is useful for you.